Vladyka Models
 |
Vladyka models is een Tsjechisch bedrijf opgericht in 1992. Eigenaar van het bedrijf is de heer Petr Vladyka, die al sinds zijn schooljaren bezig is met scheepsmodellering. |
| Naam | Omschrijving | Afbeelding |
|---|---|---|
| Atol | •RC model of the race boat with total length 515 mm. •The fast assembly kit is suitable for the beginner modellers. •Can be used with the electric motor SPEED 400/4,8V fed by six NiMh accumulators with capacity of 2200 mAh and any two-channel RC system, controller 16A. The electric motor must be cool by the cooling spiral. •The kit includes vacuum-formed plastic deck and hull, seats, boat stand and the parts for fitting the individual components of the RC system ( motor bed, receiver bed, servo system bed, controller bed ). The parts of running hardware ( rudder bearing, rudder blade, rudder arm, three blades propeller, shaft, jointed coupling ) and other accessories for finishing the model (alarm siren, ladder, railings , flag, protective shield) are included too. The construction of the model is detailly described in illustrated instructions ( English or German ). •The model surface finish is made by using a colourful stick on label. |  |
| Caribic | •RC motoryacht with total lenght 535 mm; it is suitable for the beginner modellers. •Can be used with electric motor SPEED 400/7,2V fed by six NiCd accumulators with capacity of 3300 mAh and any two- channel RC system, controller 16A. The electric motor must be cool by the cooling spiral. •The plastic kits contains only four vacuum-formed plastic parts ( hull, deck, cabin, stand ) for fast assembly. The kit contains also the parts for fitting the individual components of the RC system (motor bed, receiver bed, servo system bed, controller bed) and the parts of running hardware ( rudder bearing, rudder blade, rudder arm, three blades propeller, shaft, jointed coupling ). Other accessories for finishing the model (alarm siren, ladder, railings , flag, searchlight, lights , radar, , draw plates ) are included too. The construction of the model is detailly described in illustrated instructions (English or German ). •The model surface finish is made by using a colourful stick on label with windows and name of boat. |  |
| Falke | •RC fishing cutter with total lenght 715 mm; it is suitable for the intermediate modellers. •Can be used with the electric motor SPEED 400/7,2V fed by six NiCd accumulators with capacity of 1700 mAh, transmition 3:1, and any two- channel RC system, controller 16A. •The kit includes vacuum-formed plastic hull, life boat with boat stand and the parts for fitting the individual components of the RC system ( motor bed, receiver bed, servo system bed, controller bed ). The kit includes also the parts of running hardware ( rudder bearing, rudder blade, rudder arm, three blades propeller, shaft, jointed coupling ) and other accessories for finishing the model (lifebuoys, mast, radar, alarm siren, ladder, railings, anchor winch, anchor, lights, searchlight, draw plates, colourful stick on label with windows and name of boat). Wooden ribbons are used for gluing the deck together. High quality die-cut plywood parts allow the model to be finished as shown (deck, cabin, masts and yards ). The construction of the model is detailly described in illustrated instructions ( English or German ). •The model surface finish is made by using colour paints ( not included in the kit ). |  |
| MTB 67 | •RC motor torpedo boat with total length 500 mm; it is suitable for the intermediate modellers. •Can be used with electric motor SPEED 400/7,2V fed by six NiCd accumulators with capacity of 1700 mAh and any two- channel RC system. •The plastic kit contains only four vacuum-formed plastic parts (hull deck, cabin, torpedoes, mast, radars and canon towers) for fast assembly. The kit contains also the parts for fitting the individual components of the RC system (motor beds, receiver bed, servo system bed ) and the parts of running hardware ( rudder bearing, rudder blade, rudder arm, three blade propeller, shaft, Hardi-Joint ). Many accessories allow the model to be finished as shown (alarm siren, ladder, railings, flag, searchlight, lights, anchor winch, anchor, lifebuoys, draw plates). The construction of the model is described in detail instructions (English or German). •The surface finish of the model is made by using colour paints (not included in the kit). |  |
| Pilot | •RC model of the pilot boat with total length 500 mm. •The kit is fun to assemble and suitable for the pre-intermediate modellers, who love to build. •Can be used with the electric motor SPEED 400/7,2V fed by six NiCd accumulators with capacity of 1700 mAh and any two- channel RC system, controller 16A. The electric motor must be cool by the cooling spiral. •The kit comes with vacuum-formed plastic hull, deck, cabin, boat stand , lifeboat base and the parts for fitting the individual components of the RC system ( motor bed, receiver bed, servo system bed, controller bed ). The parts of running hardware ( rudder bearing, rudder blade, rudder arm, three blades propeller, shaft, jointed coupling ) and other accessories for finishing the model (lifeboat, lifebuoys, mast, radar, alarm siren, ladder, railings, flag, anchor winch, anchor, lights, searchlight, bitt, cross bitts, draw plates, colourful stick on label with windows and name of boat) are included too. The construction of the model is detailly described in detail illustrated instructions (English or German ). •The model surface finish is made by using colour paints ( not included in the kit ). |  |
| Sea Star | •RC motoryacht with total lenght 890 mm; it is suitable for the pre-intermediate modellers. •Can be used with two electric motors SPEED 600/7,2V fed by seven NiMh accumulators with capacity of 3300 mAh and any two- channel RC system, controller 50A. •The plastic kits contains only four vacuum-formed plastic parts ( hull, deck with cabin ) for fast assembly. The kit contains also the parts for fitting the individual components of the RC system (motor beds, receiver bed, servo system bed, controller bed) and the parts of running hardware ( rudder bearings, rudder blades, rudder arms, two blades propellers, shafts, cardan-joits ). Other accessories for finishing the model (alarm siren, ladder, railings , flag, searchlight, lights , radar, draw plates ) are included too. High quality die-cut plywood parts raise the acttractivity of the model. The construction of the model is detailly described in illustrated instructions (English or German ). •The model surface finish is maded by using a colourful stick on label with windows and name of boat. |  |
| WSP 9 | •RC police boat with total length 500 mm. •Fine design, high quality and many goodies make this a great kit to build for the pre-intermediate modellers. •Can be used with the electric motor SPEED 400/7,2V fed by six NiCd accumulators with capacity of 1700 mAh and any two- channel RC system, controller 16A. The electric motor must be cool by the cooling spiral. •The kit includes vacuum-formed plastic hull, deck, cabin, boat stand and the parts for fitting the individual components of the RC system ( motor bed, receiver bed, servo system bed, controller bed ). The kit includes also the parts of running hardware ( rudder bearing, rudder blade, rudder arm, three blades propeller, shaft, jointed coupling ) and other accessories for finishing the model ( lifeboat, lifebuoys, mast, radar, alarm siren, ladder, railings, flag, anchor winch, anchor, lights, searchlight, bitt, cross bitts, draw plates, colourful stick on label with windows and name of boat). The construction of the model is detailly described in illustrated instructions ( English or German ). •The model surface finish is made by using colour paints ( not included in the kit ). |  |
| ZAR | •RC fire patrol boat with total length 520 mm. •Fine design, high quality and many goodies make this a great kit to build for the pre-intermediate modellers. •Can be used with the electric motor SPEED 400/7,2V fed by six NiCd accumulators with capacity of 1700 mAh and any two- channel RC system, controller 16A. The electric motor must be cool by the cooling spiral. •The kit includes vacuum-formed plastic hull, deck, cabin, boat stand and the parts for fitting the individual components of the RC system ( motor bed, receiver bed, servo system bed, controller bed ). The kit includes also the parts of running hardware ( rudder bearing, rudder blade, rudder arm, three blades propeller, shaft, jointed coupling ) and other accessories for finishing the model (water cannon, lifebuoys, mast, radar, alarm siren, ladder, railings, flag, anchor winch, anchor, lights, searchlight, bitt, cross bitts, draw plates, colourful stick on label with windows and name of boat). The construction of the model is detailly described in illustrated instructions ( English or German ). •The model surface finish is made by using colour paints ( not included in the kit ). |  |
| SAR | RC S.A.R. boat with total lenght 518 mm; it is suitable for the beginner modellers. Can be used with electric motor MIG 400/7,2V fed by six NiCd accumulators with minimum capacity of 3300 mAh and any two- channel RC system, controller 20A. The electric motor must be cool by the cooling spiral. The plastic kits contains only four vacuum-formed plastic parts ( hull, deck, cabin, stand ) for fast assembly. The kit contains also the parts for fitting the individual components of the RC system (motor bed, receiver bed, servo system bed, controller bed) and the parts of running hardware ( rudder bearing, rudder blade, rudder arm, three blades propeller, shaft, jointed coupling ). Other accessories for finishing the model (alarm siren, ladder, railings , flag, searchlight, lights , radar, , draw plates ) are included too. The construction of the model is detailly described in illustrated instructions (English or German ). The model surface finish is made by using colour paints ( not included in the kit ). |  |
| P 23 | RC model of the patrol boat with total length 500 mm. The kit is fun to assemble and suitable for the pre-intermediate modellers, who love to build. Can be used with the electric motor MIG 400/7,2V fed by six NiCd accumulators with minimum capacity of 1700 mAh and any two- channel RC system, controller 20A. The electric motor must be cool by the cooling spiral. The kit comes with vacuum-formed plastic hull, deck, cabin, boat stand , lifeboat base and the parts for fitting the individual components of the RC system ( motor bed, receiver bed, servo system bed, controller bed ). The parts of running hardware ( rudder bearing, rudder blade, rudder arm, three blades propeller, shaft, jointed coupling ) and other accessories for finishing the model ( lifebuoys, mast, radar, alarm siren, ladder, railings, flag, anchor winch, anchor, lights, searchlight, bitt, cross bitts, draw plates, machine gun, colourful stick on label with windows and name of boat) are included too. The construction of the model is detailly described in detail illustrated instructions (English or German ). The model surface finish is made by using colour paints ( not included in the kit ). |  |