Dumas Products
 |
Al meer dan 70 jaar levert Dumas Products modelboten en modelvliegtuigen kits aan hobbyliefhebbers over de hele wereld. Het is daarmee de oudste continu werkende hobbyfabrikanten die er bestaat. Jarenlang droegen ze de bijnaam “The Model Boat People”, maar tegenwoordig bieden ze net zoveel vliegtuigen aan als boten. |
| Naam | Omschrijving | Afbeelding |
|---|---|---|
| 1949 Chris-Craft Racing Runabout | We think the 1949 Chris-Craft 19 ft. Racing Runabout is our sleekest looking Chris-Craft to date. Our 1/8th scale version of this popular racer is 28 inches long with a 9 inch beam. The wood framed hull is covered with expanded pvc and then planked with mahogany veneer. Like our other Chris-Crafts this kit features the finest materials including chrome plated dack fittings complete drive line hardware flag and burgee. Each kit contains everything needed to build a beautiful static display model for the office or den. Or make her RC with a two channel radio Dumas #2025 motor NiCad batteryand speed control. You will want to make the powerful Racing Runabout the next addition to you fleet. Kit #1249 Length: 28" Beam: 9" Scale: 1/8th Running Hardware: Included in kit |  |
| 1941 Chris-Craft 16' Hydroplane |  |
|
| 1947 Chris-Craft Utility Boat | This sporty little speedster from the late 40s is an all-wood kit with a double-planked hull similar to our other Chris-Craft kits. Included in the kit are chrome-plated fittings, vacuum-formed seats, running hardware, and a complete set of flags and decals. The Utility Boat would be a great start into the Chris-Craft line. If you have built the other kits, this will make a nice addition to your fleet. Kit #1240 Length: 24 inches Beam: 9 inches Scale: 1/8th Running Hardware: Included in kit |  |
| Chris-Craft Cobra | This fun little speedster is from the era of big fins and wings. The sporty Cobra model is an all-wood kit featuring a double planked birch plywood and mahogany veneer hull. The two-tone deck is achieved with the use of basswood and mahogany veneer. The hatch and fin section is preformed ABS plastic. Chrome fittings, complete running hardware including a three-blade brass prop, decals and flag complete this blunt nose beauty of the 50s. Kit #1232 Length: 27 inches Beam: 9-3/4 inches Scale: 1/8th Running Hardware: Included in kit |  |
| 1964 Chris-Craft 20' Super Sport |  |
|
| 1940 Chris-Craft Barrel Back | In 1940 Chris-Craft introduced a new hull style called the torpedo deck or barrel back. Fifty plus years later it is among the most highly coveted of the famed Chris-Crafts, and thanks to the model masters at Dumas, you can own one in miniature. In keeping with the Dumas tradition of Chris-Craft kits, this model features a doubled planked PVC and mahogany veneer hull, preformed plastic seats, chrome fittings, and complete set of running hardware. Color decals and flag and burgee helps set off the model. Kit #1234 Length: 28-1/2 inches Beam: 9-1/2 inches Scale: 1/8th Running Hardware: Included in kit Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina Modellen Tijdschrift Artikelen [Deze pagina is alleen toegankelijk voor VMBC het Anker leden] |  |
| 1956 Chris-Craft Continental | The 1956 23 ft. Chris-Craft Continental was a stand out among her peers. Her blunt nose, two-toned deck, and sloped transom epitomized this classic era. The Dumas model of the 23 ft. Continental is designed to take you back to the 50s. Our lightweight construction utilizes a die-cut poplar plywood framework with balsa sub-planking. Rich mahogany and blonde basswood veneers provide the fine exterior finish. As with all of our Chris-Craft models each kit includes a complete assortment of detail items. Preformed seats, chrome plated fittings, a complete set of running hardware, color decals, flag and burgee are all included as part of the kit. So, if you have been waiting and wondering what the next Chris-Craft was going to be, your wait is over. Kit #1243 Length: 34 inches Beam: 12 inches Scale: 1/8th Running Hardware: Included in kit |  |
| 1954 Chris-Craft Commander Express Cruiser | Style elegance and class the 1954 36ft. Chris-Craft Commander Express Cruiser has it all The latest addition to our Chris-Craft fleet is also our first cruiser. The 1954 36ft. Chris-Craft Commander Express Cruiser is sure to turn its fair share of heads. The Commander has the quality features you have come to expect from a Dumas Chris-Craft model. This all wood kit includes step by step instructions complete deck fittings vacuum molded seats and laser cut mahogany cabin detail and trim. The Express Cruiser is designed for radio control and twin screw power using two dumas 2004 6v motors. The twin screw running hardware package for the Commander is stock no. 2366 and is sold seperately. Bring style elegance and class to your fleet of Chris-Craft models with the new Commander Express Cruiser. 1954 36ft. Chris-Craft Commander Express Cruiser Kit #1244 Length: 36 inches Beam: 10-3/4 inches Scale: 1/12th |  |
| 1930 24' Chris-Craft Runabout | A beauty from yesteryear! Create a legendary masterpiece from our all wood kit of the 1930 24 ft. Chris-Craft Mahogany Runabout. The construction of this kit features a double planked hull with birch plywood on the inside with mahogany strip planking on the outside. A complete set of fittings is also included. Running hardware including shaft, stuffing box, rudder, strut, and a bronze three bladed propeller is also in the kit. They looked great on the lake in the 1930s, and they can look great on the lake again today. Kit #1230 Length: 36 inches Beam: 10 inches Scale: 1/8th Running Hardware: Included in kit |  |
| 1938 Chris-Craft Triple Cockpit Barrel Back | This sleek beauty is a triple cockpit version of our popular Chris-Craft Barrel Back kit. The Triple Cockpit Barrel Back is 40-1/2 in. long with a beam of 10-3/4 in.. The kit features a double-planked hull, vacuum formed seats, chrome-plated deck fittings and running hardware. This will make a great addition to your Classic Chris-Craft Series. Kit #1241 Length: 40-1/2 inches Beam: 10-3/4 inches Scale: 1/8th Running Hardware: Included in kit |  |
| Little Swamp Buggy | This smaller version of the Swamp Buggy can be set up for 2 channel radio control or free running. This smaller version of the Swamp Buggy can be set up for 2 channel radio control or free running. Either way the Little Swamp Buggy is a good beginners kit for both building and running. The kit is made up of birch and mahogany plywood and will require a .049 size gas engine for power. Length 18 inches Beam 7-3/4 inches Power .049 size gas engine Running Hardware none required |  |
| Swamp Buggy | This model of a Florida swamp buggy is powered by a .19-.21 size gas engine and a pusher airplane prop. A real fun boat in any kind of water! This model of a Florida swamp buggy is powered by a .19-.21 size gas engine and a pusher airplane prop. It is an all wood kit consisting of precision die cut birch and mahogany plywood parts. This rugged little boat will require a 2 channel radio for R/C operation, but no running hardware kit is required. Length 28 inches Beam 10 inches Power .19-.21 size gas airplane engine Running Hardware none required |  |
| Windy Airboat | This boat looks fast just sitting still. One of our most popular airboats. The sleek lines of Windy means awesome looks and performance. This boat looks fast just sitting still. Windy is an all wood kit made up of birch and mahogany plywood. Like all of our air boats, Windy requires no running hardware kit and is powered by a .10 size gas airplane engine. Sleekness, style, and speed, Windy has it all. Length 23 inches Beam 12 inches Power .10 size gas airplane engine Running Hardware None Required |  |
| Big Swamp Buggy | This boat was designed for fun for both model boat and model airplane enthusiasts. This boat was designed for fun for both model boat and model airplane enthusiasts. You can glide this boat over the water and up on shore just like the full size ones in the Everglades. This mahogany and birch plywood kit is easy to assemble and is built to last. No running hardware kit is required you simply start the Big Swamp Buggy engine as you would a model airplane. You will need a 2 channel radio. Length 31 inches Beam 17-1/2 inches Power .40-.60 size gas airplane engine Running Hardware none required |  |
| Carol Moran | Here at Dumas we know people are fascinated by tug boats. There is something about a relatively small boat pushing or a towing a comparative behemoth. And here at Dumas we are known for our tugs. Whether it be the Shelley Foss, Mister Darby, Brooklyn, or Jersey City, we cover over a century of tugs. With the introduction of the Carol Moran, we have broken into the area of small highly detailed scale rc tugs. Our model of the Carol Moran features a two piece vacuum formed hull. The superstructure is constructed of highly conformable diecut expanded PVC. There are detail parts galore including everything laser cut and cast parts to decals and flag. Just because she is small does not mean you have to give up realism. Best of all, the Carol Moran is a full functioning rc model. All the running hardware is included, and we show you how to power her using a servo from your two channel radio. So try your hand at the Carol Moran. An exceptional tug at an exceptional value. The Carol Moran Tug Length 17.75 inches Beam 5 inches |  |
| US Army Tug ST-74 | U.S. Army Tug ST-74 Length: 18" Beam: 4 3/4" Scale: 1/48 During WWII, the US Army operated a large fleet of ships. The rpimary task was to support the fighting man on the ground. Small harbor tugs, designed as ST, were used in large number by the Army to move ships in port and haul fuel and supply barges. Kit features: *2-piece vaccuum-form plastic hull *Die-cut PVC structure *Laser-cut details *Full-color decals *Running hardware included (4.8v motor sold seperately) |  |
| The Lackawanna Tug | This coastal tug built in 1900 not only burned coal for power but also but also hauled barges filled with coal along the New England coast. The Lackawanna was 137 feet long but her gorgeous sheer and festive air made her appear almost yacht like. Our 33 inch model of the Lackawanna captures all the beautiful lines of this classic tug. This kit features a vacuum ABS plastic hull and expanded PVC diecut parts. The Lackawanna is not short on detail with tons of laser cut parts and loads of castings and turnings. Top it off with clear and concise step by step plans and instructions and you have a great kit of an Early 20th Century Tug that is truly a pleasure to build. The Lackawanna Kit #1251 Length 33 inches Beam 6 inches Power One Dumas 2004 6v Motor Running Hardware 2368 for single screw power. Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina Modellen Tijdschrift Artikelen [Deze pagina is alleen toegankelijk voor VMBC het Anker leden] |  |
| Lord Nelson Victory Tug | Everybody has an opinion as to which boat they like the best. Here at Dumas, the opinion poll winner is the Victory Tug. There are a number of reasons why this charming little ship has captured the hearts of so many modelers. At 28 inches long, it is perfect for those of us with smaller working areas. The quality materials, such as the bass wood planking, and stainless steel rails lead to an excellent building result. Basically, everybody loves tug boats, and the Victory Tug with all of her natural wood and scruffy good looks is an exceptional find. The Dumas model of the Victory Tug provides all the high quality materials necessary to complete the kit for a static model. If you do decide to radio control the Victory Tug, all you need is a #2004 6V motor, a #2022 6V speed control, a 6V NiCad battery pack, and a 2 channel radio to get her on the water. Length 28 inches Beam 10 inches Scale 3/4 in. to 1 ft. Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina Modellen Tijdschrift Artikelen [Deze pagina is alleen toegankelijk voor VMBC het Anker leden] |  |
| Jersey City | The Jersey City is the lasest addition to the Dumas tugboat collection. A railroad tug from the 1960s, the Jersey City can still be seen working on the eastern seaboard. She is designed for radio control using a two channel radio, or this detailed workhorse makes a great static model for your den or office. The kit features a vacuum formed plastic hull, die cut expanded pvc super structure parts, laser cut wood detail parts, and all the fittings necessary to outfit her for a hard days work. Dumas running hardware 2367 is the single screw driveline required to run the Jersey City. Use Dumas motor 2004 for 6v or 2005 for 12v electric power. The Jersey City Length: 36 inches Beam: 9 inches Scale: 1/32 Running Hardware: 2367 for single screw operation Power: 2004 6v motor or 2005 12v motor |  |
| Brooklyn Tug | The Brooklyn was built in 1910 and owned by the New York Dock Co. Steam powered all her career she was inauspiciously sold for scrap in 1960. She was one of many railroad tugs, designed to transfer railroad cars from one side of New York to the other on barges known as car floats. Railroad tugs almost always towed barges alongside, with one car floating on each side, hence the heavy guards and the use of single posts instead of H-bitts. Railroad tugs were characterized by long houses because there was no need of towing space aft. The Dumas kit of the Brooklyn is designed to give you the salty appearance of the original boat. Not just your average tug, the Brooklyn has the characteristics that set the early tugs apart. You get a vacuum formed hull, all the parts to build the conventional die cut superstructure, and enough detail (laser cut parts, lots of castings, brass railings, etc.) to keep you busy through many a long winter night. If you are one of many who admire the pugnacious spirit of tug boats then this one is for you. Another classic model from The Model Boat People. Length: 39-1/2 inches Beam: 9-1/2 inches Scale: 1/32 |  |
| Akula | The Akula is a an easy to assemble sport scale model of a Russian nuclear attack sub. Each kit includes all the necessary running hardware for its single screw drive line. Simply supply a Dumas 2004 6v motor, an electronic speed control, a 7.2v battery pack, and your three channel radio, and you are good to go. Designed for pool use, the Akula contains all the molded plastic parts to bring the model to life. The enhanced building manual will walk you step by step through the successful completion of you model. So dive into the fun with newest Dumas submarine the Akula. |  |
| U.S.S. Bluefish | Dive, Dive, Dive you are in the hunt deep in enemy water. Constantly checking your sonar screen, it is an international game of cat and mouse. All of a sudden your are rocked by a depth charge. After a brief black out, power is restored and you are diving using all your naval instincts to survive and complete this mission. You need to get them before they get you! Experience submarine excitement with the USS Bluefish (SS 222). This 33 in. long model of a Gato/Balao class sbumarine has a beam of 4 in. and weighs approximately five pounds ready to run. This dynamic diving sub is recommended for pool use onlyand has a maximum diving depth of four feet depending on water conditions. The kit contains vacuum formed parts including hull, deck, motor mounts and sails, two 4.8 volt electric motors and complete drive line hardware. Length 33 inches Beam 4 inches Power Two 4.8v motors (included) Running Hardware Dual shaft hardware (included) |  |
| U.S.S. Whitehall | The USS Whitehall was commissioned in 1944 and was named after the town of Whitehall, NY, the birthplace of the US Navy. She served along the east coast and then was sent to the South Seas where she did anti-submarine duty. The Dumas kit features a 2 piece vacuum formed hulll, expanded pvc die cuts and laser cut balsa and birch plywood parts. Step by step instructions and name and number decals round out this Navy support ship kit. Designed for radio control, the Whitehall uses Dumas running hardware kit #2369 which includes the 4.8 volt motor. Length: 23" Beam: 4" Scale: 1/96th |  |
| The Jolly Jay | The Jolly Jay has many things going for it, such as mahogany plywood frames, balsa wood planking, pre-formed ABS plastic cabin parts, and complete drive line running hardware, including a 4.8 volt electric motor. Jolly Jay can be radio controlled with a two-channel radio or built for display only. Everyone is sure to enjoy the Jolly Jay. Length 24 inches Beam 8-1/2 inches Scale 1/30th Power 4.8 volt electric motor included in the kit Running Hardware Included in the Kit |  |
| Trojan Cruiser | Here is your opportunity to build the pride of the Trojan Yacht Division. The Dumas 31 in. model of the F-31 Trojan Cruiser is a beautiful cabin cruiser that carries distinction when you run her with electric R/C power or build her as the perfect addition to any den or study. She is constructed of rugged die-cut plywood. Included in the kit are numerous detail parts, including a set of 33 cast metal parts, and other decorative items. The Trojan performs beautifully as a radio controlled model. Use either two 2004 6V motors or two 2005 12V motors. For twin screws with props going in the opposite direction use hardware kit 2335. Length 31 inches Beam 12 Scale 1/12th |  |
| US Coast Guard Lifeboat | In 1963 the pleasure boating industry was booming with more new boaters than ever before. Unfortunately business was also booming for the Coast Guard with more boating accidents than ever before. They found their answer in their new 44 ft. self-righting Motor Lifeboat. Powered by twin 180 h.p. diesel engines, the boat could achieve speeds of 15 knots and in tests where it towed a 100 ton 95 foot patrol boat, she proved to be a decent little tug as well. Kit 1203 is the all wood version which features plank on frame balsa strip construction, with cleanly die-cut parts for construction of the superstructure. 39 cast fittings and a distinctive Coast Guard insignia decal top off this kit. 2335 is an upgraded heavy duty hardware kit for twin power with propellers going in opposite directions. Use two Dumas motors 2004 6V for classic scale realism. Length 33 inches Beam 9 inches Scale 3/4 in. to 1 ft. |  |
| PT-109 | Features: *Die-cut mahogany plywood frame *Die-cut birch plywood cabins *Die-cut PVC external sheeting *Cast metal deck fittings *Full-color decals *Step-by-step Instructions *Full-size drawings Length: 33" Beam: 9" Scale: Approx. 1/30 |  |
| USCG 41' Utility Boat | When the crew steps aboard a 41 ft. Utility they never know what the day will bring. They may be policeman as they pursue smugglers, or maybe paramedics as they respond to a distress call. Sometimes they work as a tug boat crew as they tow in an impounded pleasure craft. But the worst job of all is when they become a salvage crew scouting for wreckage and searching for survivors. Here is your chance to feel all the excitement with none of the dirty work. We are proud to offer two sizes of the popular 41 ft. Utility Boat. Kit #1214 is our 31 in. version and is highlighted by its accurately die-cut all wood construction. A highly detailed 32 piece deck hardware fittings set is included to make your model a hit on the mantle or on the water. Use running hardware kit #2337 for twin motor twin screw power. #1214 Length 31 inches Beam 10 inches Scale 3/4 in. to 1 ft. Power 2 Dumas #2004 6 volt motors Running Hardware #2337 for twin screws with props turning opposite directions |  |
| PT-212 78' Higgins Patrol Torpedo Boat | PT-212 78' Higgins Patrol Torpedo Boat Length: 30 1/2" Beam: 8" Scale: 1/30th The 1978 Higgins Patrol Torpedo Boat served in the Mediterranean theater of operation durring WWII with distinction. Kit Features: *Vacuum-formed hull *Scale decals *Laser-cut parts *Die-cut parts *Step-by-step instructions |  |
| U.S.S. Crockett | The U.S.S. Crockett was one of the seventeen gunboats in the Asheville Class. This class had the distinction of being the first group of Navy Ships to be powered by a gas turbine. The Crockett was capable of a top speed of 50 knots but more impressive still was the fact that she could accelerate her 230 tons from 0 to 40 knots in 60 seconds. The Crockett, stationed in South Vietnam was designed for coastal patrol, blockade reconnaissance, and support missions. But rest assured when duty called, the crew of the U.S.S. Crockett could get there in a hurry. The Dumas model of the Crockett is a builders boat. She features balsa plank over die-cut mahogany frame construction for the hull, and conventional die-cut construction for the superstructure. #2105 is an optional deck hardware kit with more than 80 cast fittings. Included in the deck hardware are all the armaments needed to send her in to battle. #2341 is the twin screw running hardware kit used to drive the Crockett. It has everything needed to complete your drive line except motors. Use two Dumas motors #2004 for 6 volt power. If you are a military enthusiast you will certainly want to try your hand at the Dumas U.S.S. Crockett. Length 51 inches Beam 7-1/2 inches Scale 5/16 in. to 1 ft. |  |
| Dauntless | We at Dumas are pleased to be able to take you back to an era of elegance. In 1946 Sparkman and Stevens designed a 66 ft. commuter boat for the express purpose of carrying commuters down the Hudson River into New York. What a glorious way to beat the traffic. These commuters were used by their owners as everyday transportation to and from work, and for pleasure trips to their favorite spots. The most famous of these commuters was the Dauntless. The Dauntless was owned by a prominent New York family. They undoubtedly considered the Dauntless a great diversion from their day to day business dealings. The days of the Dauntless are gone but you can bring them back. The Dauntless features top quality construction materials. The kit is made almost entirely of 1/8 in. mahogany plywood. All parts are cleanly die-cut, and we have included a variety of detail parts including 38 cast metal fittings. The size of the Dauntless leaves the door wide open for different powering methods. The obvious choices would be scale electric power, high speed electric power, or twin gas power, but you may have your own ideas. Use running hardware kit #2332 for all twin screw, twin power methods in the Dauntless. Length 49-1/2 inches Beam 14 inches Scale 3/4 in. to 1 ft. Power 2 Dumas #2004 6 volt motors or #2005 12 volt motors, 2 High Speed electric motors, 2 3.5cc or larger gas marine engines Running Hardware #2332 for all twin screw powering methods |  |
| American Beauty | Here is your chance to try your hand at being a tow boat captain. But just so you know what you are up against. The American Beauty built by St. Louis Ships for Argi-Trans Services measures 170 feet in length, with a beam of 45 feet, and requires 9 feet of water when fully loaded with fuel. Powered by twin 2500 h.p. diesel engines turning two 8 ft. diameter propellers, she typically moves a tow of 20-25 barges each being approximately 200 feet long by 35 feet wide at speeds of 4 to 9 miles per hour. That is almost 4 acres of barges! Fortunately as modelers, we have life a little easier. The Dumas kit of the American Beauty starts off with an ABS plastic hull. The construction of the superstructure is accomplished through the use of precisely die-cut birch and mahogany plywoods. To power the Beauty, we recommend two Dumas #2004 or #2005 electric motors and running hardware kit #2339. The running hardware is authentic in every detail right down to the twin kort nozzles. Twin forward control rudders and four flanking rudders are included to give you the maneuverability necessary to control your push boat. Other options include an 81 piece deck hardware kit #2104, which supplies all the detail castings to give her those finishing touches. We also offer kit #1219 which contains all the parts needed to make one box and one raked bow barge. We even include the cleats so you can tie your own 4 acres of barges together. Length 37 inches Beam 12 inches Scale 7/32 in. to 1 ft. Power 2 Dumas #2004 6 volt motors or #2005 12 volt motors Running Hardware #2339 for twin screws turning in opposite direction Deck Hardware #2104 81 piece fitting set Barge Kit #1219 for 2 barges 43 inches each. |  |
| Myrtle Corey | The Myrtle Corey is a fine example of a late 1800's river towboat. Typical of the day, these boats were site built, without plans, with lots of substitutions and jury rigged construction. Once commonplace along the waters of the Mississippi and Arkansas rivers, the Dumas model of the Myrtle Corey is designed to bring that amazing era back to life. This kit features vacuum formed hull and roofs. The substructure is made from diecut expanded pvc and there is a load of stripwood to provide the boat with it's characteristic planked deck and cabin sides. Everything in this kit is designed for detail and realism. We include: castings, wood turnings, laser cut parts and so much more. Even the paddlewheel and rudder hardware is included. Add a Dumas #2029 motor and your electronics and you're ready to go. So if you have been thinking about trying your hand at something a little different, take a look at the Myrtle Corey. Kit: #1253 Length: 38" Beam: 8 1/4" Scale: 1/20th |  |
| Typhoon | Dumas brings the excitement of the roaring 20s with a 1/10th scale model of the TYPHOON. Our exact scale model is based on a full scale reproduction built by Mark Mason, owner of the New England Boat & Motor Co. The construction is a double-planked hull with birch plywood on the inside and mahogany strip planking on the outside. A complete set of chrome-plated deck fittings is included to add the touch of charm and excitement to the elegant racer. Vacuum form seats with full cockpit instrumentation add to the charm. Running hardware including shaft, stuffing box, rudder, strut, and bronze propeller are included. Drawings and a easy-to-follow booklet will guide you through the building of this racing legend. Length 42-1/2 inches Beam 8-1/2 inches Scale 1/10th Power High Speed Electric Motor Running Hardware Included in the kit |  |
| Creole Queen | Looks can be deceiving, which is certainly the case with the Creole Queen. When you study the Creole Queen you could easily place her in the days of Mark Twain, wheeling down the Mississippi as onlookers sit fishing off the bank. In actuality, the Creole Queen was built in 1983 for the 1984 New Orleans World Fair. The fact that the Queen looks so authentic is no accident. Even though she is powered by a powerful diesel electric propulsion system, the builders at Halter Marine took every precaution to make sure the Creole Queen had the look of the 1800s. The Dumas model of the Creole Queen is constructed of precision die-cut birch and mahogany plywood. The detail package included in the kit is immense. It has stampings, wood turnings, castings, plastic parts, and a 3 page decal set. Running hardware kit #2349 is the paddle wheel drive system for the model. It includes an internally reduced gear head motor that supplies the perfect speed to the paddle wheel. For the more adventurous, the size of the Creole Queen leaves the door wide open for those modelers wishing to try less conventional powering methods. Live steam would certainly be a possible option. So if you have always dreamed of building your own working stern wheeler, the Dumas Creole Queen is for you. Length 48 inches Beam 10 inches Scale 1/4 in. to 1 ft. Running Hardware #2349 Include 12v electric motor to power the paddle wheel. |  |
| Mt. Washington | The Dumas kit of The Mount Washington includes everything needed to bring the original grandeur back to life. An ABS plastic hull and a birch plywood die cut superstructure provide the basic shape, while embossed plastic, cabin detail, cast metal fittings, and full color decals add the touches that make the model complete. Our step by step instructions will help you transform your kit into an historic model that will be sure to find a place in the history of your family. Length: 44-1/2 inches Beam: 12 inches Scale: 1/48th Power: Use Dumas #2029 12V Gearhead motor Running Hardware Included in the kit |  |
| Sailboat | This simple sailboat kit is designed so that even younger children can enjoy the creative satisfaction of building a model boat. When we say fun for the entire family, we mean everyone. This simple sailboat kit is designed so that even younger children can enjoy the creative satisfaction of building a model boat. It will make a great gift for the younger model boat builders. - Length 12 inches - Beam 4-1/2 inches - Mast 15 inches |  |
| Hobie Cat | This scale model of the popular west coast catamaran, the Hobie Cat 14 is an all wood kit that includes nylon sails. Itis easy to build and she is fast and fun to free. Length 14 inches Beam 6-1/2 inches Mast 22-1/4 inches Sail Control Unit Not designed for radio control. |  |
| Ace Sloop | A free sailing model for small lakes or swimming pools. Built from die-cut mahogany with 21 inch birch mast and cloth sails. All rigging and fittings are included. Length 17 inches Beam - 5-1/4 inches Mast 21 inches Sail Control Unit Not design for radio control |  |
| DN Iceboat | We believe this static display all wood model is the only kit of an iceboat on the market today. A fun little boat, it is constructed out of mahogany and birch plywood and covered with mahogany veneer. Kit includes sails and all rigging material. This great little kit will make a nice addition to any modelers fleet, young or old. Length 19-1/2 inches Beam 10-1/2 inches Height 22-1/2 inches Sail Control Not Designed For Radio Control |  |
| Snipe | This simple line sailboat has been a favorite for years and is now available in kit form. This all wood kit is an excellent choice for a first time builder and will give them good building experience enabling them to move up to a larger model. Experienced builders will want to build it for fun and will want to see the great finish they can put down on the rich mahogany decking. The kit includes materials to make the stand, sails, and all the rigging. The model is for static display only. This makes a great kit to start with whether you are building it by yourself or with a friend. Length 16 inches Beam 5-1/4 inches Mast 19 inches Sail Control Unit Not Designed For Radio Control |  |
| Lightning | If you prefer the leisurely pace of free sailing (just watching your boat go where the wind takes it), the Lightning is for you. This one inch equals one foot scale replica of the Lightning Class boat also makes a beautiful display model for your office or living room. This kit is made up of plywood frames and handsome mahogany planking. Nylon sails add the finishing touch to this kit. Length 19 inches Beam 6-1/2 inches Mast 26 inches Sail Control Unit Not designed for radio control |  |
| Huson 24" Wood | This smaller version of the Huson 36 is fun to assemble and easy to sail. The Huson 24 is available in either a wood kit or ABS plastic kit. If you love to build, the Huson 24 wood kit is for you. You assemble the cleanly die-cut frames and then strip plank the hull with balsa wood strips. The ABS plastic kit contains only 8 parts for fast assembly. Both kits contain sewn dacron sails, aluminum mast, and complete rigging. Both kits require a two channel radio. You do not need a sail control unit, simply use one of the RC servos from your radio. A simple and fun way to enjoy radio controlled sailing. Length 24 inches Beam 6-3/4 inches Mast 31 inches Sail Control Unit Use a servo from your two channel radio. |  |
| Star Class | A thrill to sail, exciting to race: the full size Star was designed and built in 1911 yet remains an Olympic Class favorite. This all wood kit gives you rich mahogany planking over a plywood frame and precision die-cut wood pieces. The kit contains complete fittings and cut and sewn sails. She is as handsome as her full size counterpart. Use a Dumas 3702 sail control unit and 2-channel radio and you are ready for hours of sailing enjoyment. Length 30 inches Beam 7-5/8 inches Mast 44 inches |  |
| Noah's Ark | Itroducing our brand new kit Noah's Ark. She is designed for radio control 2-channel radio required. Noah and animals are NOT included. Kit # 1262 Length: 34" inches Beam: 8" inches Running Hardware Kit included! Kit Features: Laser-Cut Wood Parts Panel-on-frame Construction Stand Die-Cut PVC Parts Running Hardware Noah and animals are again Not included. |  |
| SC-1 Class Sub-Chaser | The sub-chaser prowled the waters in the Atlantic during WWII, during which time they were credited with sinking a number of U-boats. The SC class served a short time in WWII, but was soon replaced with a more powerful class of sub chasers. This kit features laser-cut plank-on-frame construction. Kit # 1259 Length: 37 1/2" inches Beam: 4 3/4" inches Designed for radio control- 2-channel radio required. Use Running Hardware Kit # 2372 |  |
| The George W Washburn Tugboat | The George W. Washburn was launched by the Cornell Steamboat Company to move barges and cargo like stones, sand, and bricks up and down the Hudson River between Albany and New York City. She was, during her early years, considered the fastest tug on the Hudson. Since she took on paying passengers, her appearance was kept up. It was said that a Cornell Steamboat could be notices from great distances by the yellow and black color of the smoke stacks. Sad to say, however, that the George W Washburn and Cornell Steamboat Company are no longer around today. This kit features laser-cut plank-on-frame construction. Kit # 1260 Length: 30" inches Beam: 5 1/2" inches Designed for radio control- 2-channel radio required Use Running Hardware Kit # 2373 |  |
| USCG 36500 36' Motor Lifeboat | The CG 36500 is famous for the rescue of 32 men from the tanker S. S. Pendleton, which broke in half during a winter storm off Chatham Bar, the elbow of Cape Cod (also known as New England's graveyard of ships). To this day, the saving of the Pendleton crew remains the single greatest small-boat rescue in the history of the United States Coast Guard. The crew received the Gold Life Saving Medal for hard work during this cold, dark rescue attempt. This is a primarily laser-cut wood kit features plank-on-frame construction. Kit # 1258 Length: 27" inches Beam: 8" inches Use Running Hardware Kit # 2371 |  |
| 19 ft. Chris-Craft Racer Laser Classic | The Laser Classic collection from Dumas is the best of both worlds. The technology and precision of laser cutting combined with our ever-popular Chris-Craft line. The Laser Classic collection from Dumas is the best of both worlds. The technology and precision of laser cutting combined with our ever-popular Chris-Craft line. The new Classic Collection premiers with the introduction of three new kits. They are the 1929 Chris-Craft 24 ft. Runabout, kit #1701, the 1949 Chris-Craft 19 ft. Racer, kit #1702, and the 1938 Chris-Craft 27 ft. Triple Cockpit Barrelback, kit #1703. The Classic Collection kits feature laser cut balsa and mahogany parts, peel and stick decal set, display base with pedestals, step-by-step instructions, and a complete set of cast metal deck fittings. These static display models will look great in either home or office and are great kits for every level of model builder. Start your collection today of the new Laser Classic Collection 1930 Chris-Craft 24 ft. Runabout #1701 Length 12 inches Beam 3-1/2 inches Scale 1/24th 1949 Chris-Craft 19 ft. Racer #1702 Length 9-1/2 inches Beam 3 inches Scale 1/24th 1930 Chris-Craft 27 ft. Triple Cockpit Barrelback Length 13-1/2 inches Beam 3-3/4 inches Scale 1/24th 1702+19 ft. Chris-Craft Racer Laser Classic |  |
| 1940 Chris-Craft Barrel Back 1/24th Scale | Three long awaited additions to our Laser Classic Collection! This beautifully laser cut model of a 1940 Barrel Back contains everything to build this miniature classic. The Laser Classic collection from Dumas is the best of both worlds. The technology and precision of laser cutting combined with our ever-popular Chris-Craft line. The Classic Collection is expanding with the introduction of three new kits. They are the 1940 Chris-Craft 19ft. Barrel Back, kit #1705, the 1935 Chris-Craft 25 ft. Family Cruiser, kit #1706, and the 1956 Chris-Craft 24 ft. Sedan Cruiser, kit #1707. The Classic Collection kits feature laser cut balsa and mahogany parts, peel and stick decal set, display base with pedestals, step-by-step instructions, and a complete set of cast metal deck fittings. These static display models will look great in either home or office and are great kits for every level of model builder. Add to your collection with any of these Classic Chris-Crafts 1940 Chris-Craft 19 ft. Barrel Back #1705 Length 9 inches Beam 3 inches Scale 1/24th 1935 Chris-Craft 25 ft. Famil Cruiser #1706 Length 12 inches Beam 4 inches Scale 1/24th 1956 Chris-Craft 24 ft. Sedan Cruiser Length 12 inches Beam 4 inches Scale 1/24th 1705+1940 Chris-Craft Barrel Back 1/24th Scale Stock No. 1705 |  |
| Chris-Craft 24 ft. Runabout Laser Classic | The Laser Classic collection from Dumas is the best of both worlds. The technology and precision of laser cutting combined with our ever-popular Chris-Craft line. The Laser Classic collection from Dumas is the best of both worlds. The technology and precision of laser cutting combined with our ever-popular Chris-Craft line. The Classic Collection premiers with the introduction of three new kits. They are the 1929 Chris-Craft 24 ft. Runabout, kit #1701, the 1949 Chris-Craft 19 ft. Racer, kit #1702, and the 1938 Chris-Craft 27 ft. Triple Cockpit Barrelback, kit #1703. The Classic Collection kits feature laser cut balsa and mahogany parts, peel and stick decal set, display base with pedestals, step-by-step instructions, and a complete set of cast metal deck fittings. These static display models will look great in either home or office and are great kits for every level of model builder. Start your collection today of the new Laser Classic Collection 1930 Chris-Craft 24 ft. Runabout #1701 Length 12 inches Beam 3-1/2 inches Scale 1/24th 1949 Chris-Craft 19 ft. Racer #1702 Length 9-1/2 inches Beam 3 inches Scale 1/24th 1930 Chris-Craft 27 ft. Triple Cockpit Barrelback Length 13-1/2 inches Beam 3-3/4 inches Scale 1/24th 1701+Chris-Craft 24 ft. Runabout Laser Classic |  |
| Chris-Craft Triple Cockpit Barrel Back Laser Classic | The Laser Classic collection from Dumas is the best of both worlds. The technology and precision of laser cutting combined with our ever-popular Chris-Craft line. The Laser Classic collection from Dumas is the best of both worlds. The technology and precision of laser cutting combined with our ever-popular Chris-Craft line. The new Classic Collection premiers with the introduction of three new kits. They are the 1929 Chris-Craft 24 ft. Runabout, kit #1701, the 1949 Chris-Craft 19 ft. Racer, kit #1702, and the 1938 Chris-Craft 27 ft. Triple Cockpit Barrelback, kit #1703. The Classic Collection kits feature laser cut balsa and mahogany parts, peel and stick decal set, display base with pedestals, step-by-step instructions, and a complete set of cast metal deck fittings. These static display models will look great in either home or office and are great kits for every level of model builder. Start your collection today of the new Laser Classic Collection 1930 Chris-Craft 24 ft. Runabout #1701 Length 12 inches Beam 3-1/2 inches Scale 1/24th 1949 Chris-Craft 19 ft. Racer #1702 Length 9-1/2 inches Beam 3 inches Scale 1/24th 1930 Chris-Craft 27 ft. Triple Cockpit Barrelback Length 13-1/2 inches Beam 3-3/4 inches Scale 1/24th 1703+Chris-Craft Triple Cockpit Barrel Back Laser Classic |  |
| Skipjack | The newest model in our popular Laser Clasic Collection is a beautifully crafted model of a classic Skipjack. This beautifully crafted model kit of a classic Skipjack contains all the necessary items for the construction of a first class static model. One of the many advantages of laser cutting is its ability to provide fine detail such as precise notches and perfectly scribed decks as furnished in this kit. That combined with the full size plans, step by step instructions and highest quality materials leads to a a finished result you will be proud to display in your home or office. Count on Dumas for the finest in laser cut models. Kit No. 1704 Length 12 inches Beam 5 inches |  |
| 1935 Chris-Craft Streamline Cruiser 1/24th Scale | Here is a true Classic! This model of the 1935 Streamline Cruiser is a beautiful representation of the era. Laser cut out of mahogany and balsa, the Chris-Craft Family Cruiser will bring back memories of days gone by. The Laser Classic collection from Dumas is the best of both worlds. The technology and precision of laser cutting combined with our ever-popular Chris-Craft line. The Classic Collection is expanding with the introduction of three new kits. They are the 1940 Chris-Craft 19ft. Barrel Back, kit #1705, the 1935 Chris-Craft 25 ft. Family Cruiser, kit #1706, and the 1956 Chris-Craft 24 ft. Sedan Cruiser, kit #1707. The Classic Collection kits feature laser cut balsa and mahogany parts, peel and stick decal set, display base with pedestals, step-by-step instructions, and a complete set of cast metal deck fittings. These static display models will look great in either home or office and are great kits for every level of model builder. Add to your collection with any of these Classic Chris-Crafts 1940 Chris-Craft 19 ft. Barrel Back #1705 Length 9 inches Beam 3 inches Scale 1/24th 1935 Chris-Craft 25 ft. Famil Cruiser #1706 Length 12 inches Beam 4 inches Scale 1/24th 1956 Chris-Craft 24 ft. Sedan Cruiser Length 12 inches Beam 4 inches Scale 1/24th 1706+1935 Chris-Craft Family Cruiser 1/24th Scale Stock No. 1706 |  |
| Little Jon | This air boat is perfect for the swimming pool or a small pond. It is easy to build from pre-cut mahogany wood ad can be electric or gas powered. Sorry, but the Little Jon can not be radio controlled. Length 15 inches Beam 6 inches Power 3 volt electric motor or .020 size Pee Wee gas engine Running Hardware none required |  |
| Half Pint Cabin Cruiser | Made from die cut mahogany and birch plywood and meranti veneer, the Half-Pint is a good choice for the modeler who likes the dark rich look of natural wood. Length: 18" Beam: 6 3/4" |  |
| Sk Daddle, Jr. | This all wood kit is designed for either gas or electric power. The kit consists of birch and mahogany die-cuts and step by step writen instructions along with full size plans are included. Use running hardware #2314 for .049 gas engine or running hardware #2331 for electric power. Motor is included in #2331. Then look out your are on your way. Length 18 inches Beam 7-3/4 inches Power .049 engine or electric motor Running Hardware #2314 for .049 engine, #2331 for electric power. Motor included in #2331 |  |
| Sk Daddle Too | Another of the famous Hallet SK boats, this boat is great for drag racing or just for fun. This all die-cut mahogany and birch plywood kit has plenty for easy engine and radio access. Designed for a .15 to .21 marine engine, use Dumas running hardware kit #2302. Length 27 inches Beam 10-1/2 inches Power .15 to .21 marine engine |  |
| Barge | Scale: 7/32": to 1' Each Barge is 43" long For the American Beauty we offer kit #1219 which contains all the parts needed to make one box and one raked bow barge. We even include the cleats so you can tie your own 4 acres of barges together. |  |
| Sk Daddle 20 | A specially designed SK model for RC competition. Top grade plywood throughout makes it easy to build. For SK-20 use running hardware kit #2307 or #2308 with a .20 engine. For SK-60, use running hardware kit # 2319 with w .60 engine. SK-Daddle .20 Length 26 inches Beam 9 inches Power .20 engine Running Hardware #2307 angle drive line |  |
| Deep Vee 20 | Our Deep Vee line of boats are available in wood and are for modelers who enjoy building as well as racing. The wood deep vee kits are made of birch and mahogany plywood and all die cuts are cleanly cut. The Deep Vee boats are available in 20, 40, & 60 sizes Deep Vee 20 Length: 24" Beam: 8-5/8" Power: .20 size gas marine engine Deep Vee 40 Length: 32" Beam:11" Power: .40 size gas marine engine Deep Vee 60 Length: 38" Beam: 14-1/4" Power: .60 to .67 size gas marine engine |  |
| Deep Vee 40 | Our Deep Vee line of boats are available in wood and are for modelers who enjoy building as well as racing. The wood deep vee kits are made of birch and mahogany plywood and all die cuts are cleanly cut. The Deep Vee boats are available in 20, 40, & 60 sizes Deep Vee 20 Length: 24" Beam: 8-5/8" Power: .20 size gas marine engine Deep Vee 40 Length: 32" Beam:11" Power: .40 size gas marine engine Deep Vee 60 Length: 38" Beam: 14-1/4" Power: .60 to .67 size gas marine engine |  |
| Deep Vee 60 | Our Deep Vee line of boats are available in wood and are for modelers who enjoy building as well as racing. The wood deep vee kits are made of birch and mahogany plywood and all die cuts are cleanly cut. The Deep Vee boats are available in 20, 40, & 60 sizes Deep Vee 20 Length: 24" Beam: 8-5/8" Power: .20 size gas marine engine Deep Vee 40 Length: 32" Beam:11" Power: .40 size gas marine engine Deep Vee 60 Length: 38" Beam: 14-1/4" Power: .60 to .67 size gas marine engine |  |
| Miss Unlimited | Try this number for RC or tethered racing. It is a mahogany and plywood kit and requires a .29 or .35 engine. Use running hardware kit #2351. Kit #1305 Length 36 inches Power .29 or .35 engine Running Hardware #2351 for single screw gas power |  |
| SK Daddle | For full bore running, this model of the Hallet SK boat can be lots of fun! All parts are pre-cut birch or mahogany plywood. A watertight compartment protects radio control gear. For radio control you can use up to a .40 engine. Use running hardware kit # 2351. Length 36 Beam 14 inches Power up to .40 engine Running Hardware #2351 solid drive line kit |  |
| Deep Vee 21 | Length: 30" Beam: 11" This boat was designed for competition and has proven itself many times. This birch and mahogany plywood kit is easy to detail to look like your favorite offshore boat. The boat is designed for either a 3.5 cc gas inboard or outboard marine engine. For inboard installation, use flex cable drive running hardware kit #2355. No running hardware kit is needed for outboard installation. Power: 3.5cc size gas marine engine, inboard or outboard |  |
| Little Shelley Foss Tugboat | From the great Puget Sound comes the 24 inch monster mover. Everybody seems to have a lot of respect for tug boats. The Foss story is one that rivals the toughness of his boats. From the original purchase of a $5.00 row boat, to a current maritime fleet of over 300 vessels, Foss has emerged as a leader in the west coast tug business. #1206 is the 24 inch version which features easy to build die-cut construction, a 30 piece cast fitting set, and Foss decals. Use one #2004 6V motor with hardware kit #2359 to provide single motor twin screw power Length 24 inches Beam 8 inches Scale 1/45 Power One Dumas #2004 6 volt motor Running Hardware 2359 for twin screws turning in opposite directions |  |
| Osprey | You have a full day of fishing ahead and the Osprey is just the boat to get the job done! This charming model combines a salty appearance with the lines of a New England style fishing boat. The end result being a real eye pleaser that is a pleasure to build. The Osprey is built from die cut poplar plywood, and includes all the drive line hardware and scale detail parts. The instructions are laid out in such a way that the beginner will feel as comfortable as the pro. If this is your first boat or your hundred and first the economically priced Osprey will please modelers young and old. Length 24-1/2 inches Beam 9-7/8 inches Power Use Dumas #2021 4.8v electric motor Running Hardware Included in kit |  |
| Tuna Clipper | Over the years, one of our all time popular kits has been our scale version of Campbell Industries 220 ft. purse seiner. This highly detailed 37 in. kit is beautiful as is. Likewise, there is plenty of room for those personal touches. The kit offers quality diecut construction with mahogany planking. Deck hardware is included as is the shaft, stuffing box, and rudder. If scale is your cup of tea, you’ll love this classic at its low price. |  |
| Pay'n Pak | The Pay N Pak is a good running, stable hydroplane and is radio controllable using a two channel radio. So, whether you are in competitive racing or just out to have fun, the Pay N Pak will provide you with both. It's made of rugged mahogany and birch plywood and uses running hardware kit #2322. Length 30 inches Beam 13-1/2 inches Power.20 or 3.5cc gas marine engine Running Hardware #2322 solid shaft drive line for engines with a 1/4-28 size engine shaft |  |
| USCG 40' Utility Boat | The Dumas version of the U.S.C.G. 40' Utility Boat is a faithful 7/8":1' reproduction of the full size craft. |  |
| Shelley Foss Tugboat | From the great Puget Sound comes a 36 inch monster movers. Everybody seems to have a lot of respect for tug boats. The Foss story is one that rivals the toughness of his boats. From the original purchase of a $5.00 row boat, to a current maritime fleet of over 300 vessels, Foss has emerged as a leader in the west coast tug business. Kit #1207 is the 36 inch version, which is constructed of top quality die-cut plywood, and a 40 piece cast fitting set. For the #1207 you should use either two #2004 6V motors or two #2005 12V motors with running hardware kit #2312 for twin motor, twin screw power. Length 36 inch Beam 12 inches Scale 1/30 Power 2 Dumas #2004 6 volt motors or #2005 12 volt motors Running Hardware use #2312 for twin screws turning in opposite directions. |  |
| American Enterprise | Length: 52" Beam: 12" Scale: 1/2":1' From Halter Marine comes an experimental craft for the hard working commuter. The American Enterprise was a trial balloon constructed for carrying crews and supplies to and from off shore oil drilling rigs. The goal of the Enterprise was to get there and back in a hurry regardless of the weather conditions. To accomplish this task she was equipped with a high speed 24 in. water jet powered by a gas turbine. When they were feeling a bit more leisurely they switched to the 16 in. water jets powered by the two Detroit Diesels. Here is your chance to own a crew ship of your own. This all wood kit is engineered out of top grade birch and mahogany plywood, precision die-cut for an exacting fit. A 27 piece cast fittings set is included, as well as many other detail items. The Enterprise runs beautifully as a scale model with two Dumas #2004 or #2005 electric motors. But her sleek lines may make you want to push her to the limit. Perfectly suited for twin high speed electric or two gas engines. Power: 2 x #2004 6v motors or #2005 12v motors 2 x #2025 6v High speed electric motors 2 x 3.5cc size gas marine engines Running Hardware: #2332 for all twin screw powering methods. |  |
| Short Stuff DV-10 | Length: 18" Beam: 6 1/4" The Short Stuff is a good kit for the person looking for a first time boat that is radio controllable. Short Stuff, also known as Deep Vee 10, is a wood kit. It is made up of birch and mahogany plywood, is easy to assemble and can be powered by either gas or electric. Power: .049, .09, .10 size gas engine .05 electric motor Running Hardware: For an .049 gas engine, use running hardware kit #2314 For an .09 or .10 gas marine engine, use running hardware kit #2326, #2327, or #2334 For an electric motor use running hardware kit #2336 |  |
| Vee Bottom SK Boat | Length: 18" Beam: 7" The SkeeVee 10 looks and performs like the big ones! Her vee bottom gives her stability in rough water. This all wood kit is a good one for the first time boat builder and R/C operator to get started with. It can be either gas or electric powered. A great model to get you started in R/C boating. Power: .049, .09, .10 size gas engine .05 electric motor Running Hardware: For the .049 gas engine use #2314 For the .09 to .10 engines use #2326, #2327, or #2334 For electric power use #2336 |  |
| Crackerbox | Length: 47" Beam: 17" Absolutely Wild! That is what you will say after your first experience behind the throttle of a Dumas Crackerbox. Designed for use with your favorite gasoline engine, the Dumas 1/4 Scale Crackerbox brings forth the same kind of excitement that has made full size Crackerbox racing the popular class it is today. The Dumas version of the Crackerbox is designed to get you on the water in a hurry. Die cut mahogany frames and skinned with light ply, the Dumas Crackerbox is an EASY BUILD. Even the scale building jig is included in the kit. Although you may feel like your behind the wheel, size limitations prohibit this. That is why we have included two scale drivers to act as your alter-ego. So build, enjoy, and hold on tight especially in those turns. The Dumas 1/4 Scale Crackerbox is the real deal. Power: Various line trimmer engines Running Hardware: #2365 submerged flex drive hardware |  |
| Mister Darby | The point of all of these statistics is to emphasize the incredible size of the Mister Darby. And like her full size sister, the Dumas kit of the Jackson Marine Mister Darby is not just your average tug boat kit. The Dumas Mister Darby, kit #1217, features a huge hand laid up fiberglass hull capable of handling about any powering method you might care to experiment with. The superstructure is constructed out of heavy duty die-cut plywood. Plus, we have included dozens of castings and other detail items to add those finishing touches. Running hardware kit #2340 is the twin screw hardware package that includes the gear reduction, drive line hardware, right and left hand cast bronze struts, and the huge counter rotating 3-5/8 in. investment cast 4 blade bronze propellers. We used Dumas #2005 12V electric motors and a small car batter to power the Darby. The car battery helps supply the Darby with the 60 plus pounds she needs to get down the waterline. When the Darby is completed in this configuration she is capable of pulling a rowboat with 2 men around a lake. Big boat, big payload, big power. Everything about the Mister Darby is big. Dimensions Length-149 ft. Beam-40 ft. Draft-19 ft. Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina Modellen Tijdschrift Artikelen [Deze pagina is alleen toegankelijk voor VMBC het Anker leden] |  |
| Great Lakes Freighter | Dumas brings to life the Great Lakes Style Freighter, modeled after a 350' bulk carrier, the 1/96th semi-scale model makes a beautiful representation of the famous freighter. The hull and superstructure is constructed of highly conformable, die cut, expanded PVC over die cut plywood frames. There are detail parts galore including laser cut wood, cast parts, vacuum form life boats, stacks, decals, flag and more. Add to that, the step-by-step building instructions and you are on your way to constructing your own miniature freight moving business. Features Lots of laser cuts, cast parts and vacuum form life boats and stacks, decals, flag and more Step-by-step building instructions Length: 46" Beam: 6" Scale: 1/96th approximately Level: Intermediate Running Hardware and Motor sold separately. |  |