Belair

Naam	Omschrijving	Afbeelding
German S-boat MTB	This model is of a German S-boat as used in WWII. Round bilge hull, simple construction. For electric propulsion or up to 1.5cc. Scale: 1:32, length 35in beam 5.5in The Belair parts set contains hull base, bulkheads, plywood deck, gun mount, main superstructure parts, cabin top, hatches. Please note not all shaped parts for the superstructure are shown on the plan, presumably the designer expected the modeller to build them into the design, as such some items are not included in the parts set.
Thorneycroft Mtb	Includes all bulkheads, keel, most of the superstructure detail (some cabin parts are not shown on plan and the builder will need to develop these details as they build), Birch plywood decking, plus many smaller hatch formers, etc. Quality plywood used throughout. The Parts Set will save you hours if tedious cutting. Specification from publisher "This 1:24 scale (36.75in in length, beam 8.5in.) scale MTB is absolutely authentic and fully detailed. For electric or 1.5cc motors; R/C can easily be fitted
Range Safety Launch	Range Safety Launch. Includes laser cut parts for frames, keel, superstructure, bulkheads in Birch plywood. Photo shows some of the parts. Includes 1/16" plywood decking with laser etched planking and details. A 1:12 scale model of a Thorneycroft RAF launch, length 43in., beam 12.5in Suitable for 2.5cc upwards. Excellent for R/C
Starlet Yacht	Take the tedium out of building the pretty 36" Starlet with a Belair Parts Set. Plans not supplied, available from My Hobby Stores. The Starlet parts set includes all shaped parts, laser cut in Birch plywood, such as bulkheads, transom, keel, cabin parts, crutch, plus two rudders - original design and larger racing rudder. Builder to supply strip and planking material
Vamoose	Includes all the shaped plywood parts required to build the basic hull and superstructure, saving the builder hours of tiring hand cutting. Keel in birch ply, all frames and bulkheads in birch and liteply, cabin parts with window aperatures cut out, deck in 1/16th plywood. Plank-on-frame model, 1:16 scale and 1048mm long. It is intended for radio control with twin electric drive motors.
Veron Marlin boat	Includes all shaped balsa and plywood parts, laser cut in quality birch plywood. Bulkeads, cabin structure, deck plywood, hull skins in 1/16 Birch plywood, plus sheets of laser cut plywood parts. Builder to supply plan either their own or the original from Phil's Plans Services. Some additional flat sheet will need to be supplied, as the parts set contains shaped parts. Veron Marlin 36 inch all wood construction for 600 size electric motors or brushless equivalent.
Veron Veronica yacht	A part set for the delightful Veron Veronica yacht, that includes all the shaped parts required to build the basic hull. Upper and lower chines, keel, nine bulkheads, stern plate, plus many smaller parts are all accurately laser cut in quality plywood or balsa. Deck is cut in 1/16th plywood and laser etched with planking, just requiriing varnishing to give a good scale look. Specs: 27" Hard Chine Yacht with full Bermuda rig. Introduced in the late 1950s to the Veron range by designer Phil Smith. Plan not included, available from •Colin Smith (Veron, Mercury, KK) -12 Redhill Park, Wimborne Road, Bournemouth Dorset BH10 7BW Tel:07747 722724 email: csmithbmth@gmail.com. These plans are genuine and as good as the day Phil Smith draughted them, rather than inferior, ripped off plans available elsewhere online. We are very grateful to Colin Smith, Phil's son for the image of the original Veronica, taken at Poole Park for the Veron catalogue. This image was taken by Phil and shows the beautifull lines of this fine yacht.
Vosper Rescue and Target Towing Launch	Parts Set for the 1:24 scale model of the 68ft Vosper Rescue and Target Towing Launch, designed by Vic Smeed. Includes laser cut parts for frames, keel, superstructure, bulkheads in Birch plywood. 1/16th plywood deck also included. Photo shows some of the parts. The parts set will save hours of tedious hand cutting. Plan not included - available from MyHobbyStore. Plan MM530 Specification Length 34ins., beam 9.5in., for 1.5 - 3.5cc diesels, or electric drive. Suitable for R/C.
Wattie 1933 Steam Tug	Includes all the shaped plywood parts required to build the basic hull and superstructure, saving the builder hours of tiring hand cutting. Keel in birch ply, all frames and bulkheads in birch and liteply, cabin parts with window aperatures cut out, deck in Poplar plywood. SPECIFICATION Scale of 1:24 giving a model length of just over 40 inches and was designed by John Parker. The model is designed to built in a conventional plank-on-frame style and the prototype was electric powered.